We’ve been dealing with the sale of raw materials used in the production of cleaning and sanitizing products for many years.
We operate in a wide range of sectors from domestic to industrial cleaning, on through to the disinfection of medical equipment and their environments, from the disinfection of food contact surfaces, to sanitizing and cleaning systems, as well as both wastewater and swimming pool water treatment.
The Covid-19 pandemic has required a massive and global intervention to contain its spread and has increased the need to disinfect areas and increase personal hygiene levels.
Hand-washing sanitizing gels are currently witnessing enormous demand in all markets, for which we at Garzanti offer rheology modifiers such as Carbomer.
We have also reiterated, in the strongest means, our support to chemical companies sector with the offer of products with antimicrobial cleaning actions.
The disinfectant products we offer often enter the PMC formulations approved by the Italian Ministry of Health and are listed as Biocidal product-types 1 to 5 according to EU regulation.
- 70% glycolic acid, proven antiviral and antibacterial action, excellent sequestering and descaling agent.
- 90% biodegradable in 7 days, low corrosivity, non-flammable and non-volatile.
Effective against the following viral strains:
- Herpes simplex virus type 1 VR-733, strain F (1) ≥99.99
- Influenza type A2 VR-544, Hong Kong strain ≥99.99
- Rhinovirus type 37 VR-1147, strain 151-1 ≥99.99
In the USA, a dossier was submitted to the EPA for an emerging viral pathogen claim against Covid-19 for Glycolic Acid.
Oxone® (potassium monopersulfate), strong oxidant often used as a substitute for chlorine. Very stable up to pH7. Unlike chlorine, it does not cause irritation and does not generate chloramines, as well as being very effective in the elimination of bad odours.
It has Biocidal properties in these areas:
- Disinfectants and algaecides not intended for direct application to humans or animals (PT2)
- Disinfectants for veterinary hygiene (PT3)
- Disinfectants for food and feed areas (PT4)
- Disinfectants for drinking water (PT5)
Oxone® can therefore be used in the following areas:
- Room sanitization
- Swimming pool water treatment
- Waste water treatment
- Dental prosthesis cleaning
- Chemical synthesis, also for the preparation of API’s (e.g. Omeprazole, Diltiazem, Rosuvastatin)
- Bleaching and rendering
Rely+On ™ Virkon ™
Rely+On ™ Virkon ™: a broad spectrum virucidal disinfectant.
It is considered the disinfectant of choice for use in medical facilities, pathology and biosecurity containment laboratories, treatment centres and care homes.
Rely + On ™ Virkon ™ has few limitations on handling and use compared to many other disinfectant products. In accordance with European legislation on the classification and labelling of chemical products it is not classified as harmful or sensitive either as a powder prepared or in its diluted ready-to-use format.
Quaternary ammonium salts.
Quaternary ammonium salts: Benzalkonium Chloride 50% and Didecyldimethylammonium chloride 10% and Cetylpyridinium Chloride.
Product Type 6 preservatives.
Product Type 6 preservatives: Garzanti is pleased to offer Troy’s Troyguard™ and Mergal™ ranges. In addition to the classic solutions for in-can based BIT / CMIT / MIT preservatives, they are also proposed in combination with amines, and as a result it is possible to avoid EUH208 and H317 labelling on finished products.
In addition to the benefit of not needing to be labelled, Troyguard boast a good yield, an affordable cost and a sufficeint speed of action in most applications.
For more information, offers and samples, contact Andrea Capuzzi: email@example.com